CoatMasters sealers and vapor coating barriers

CoatMasters a superior product in comparison to the competitors.

·        The CoatMasters product is an environmentally friendly water based product with very low VOC and a much higher solids content that provides a very high stain resistance.  With CoatMasters you do not have to worry about a milky appearance that some sealers get after application.  CoatMasters provides long lasting protection against common household liquid stains, while maintaining its long term gloss shine appearance, greatly reduces efflorescence build up by also acting as an impregnating sealer, provides anti-graffiti protection (sacrificial) for cleaning and recoating, has quick dry time with excellent “hydrolytic” stability for moisture resistance, surface film is breathable and has excellent recoating properties.  In addition, CoatMasters Sealer also exhibits excellent adhesion to their substrate materials used in combination such as metal, wood, and plastic.  The use of these products qualifies for 1-LEED point under the “LEED for New Construction and Major Renovations”, section EQ Credit 4.2: Low Emitting Materials: Paints & Coatings.  

Additional benefits

·        Eliminates efflorescence effect from cementitious compositions.

·        Hard film resin and excellent adhesion provides “Anti-Graffiti” protection, cleanable by solvent and/or by high pressure washing

·        Provides excellent water repellency from water and salt water solutions.

·        Reduces salt transmission and chloride ion penetration on rebars, thus providing additional corrosion protection.

·        Excellent freeze thaw stability greatly reduces tendency for spalling.

·        Does not contain any formulated glycols or similar solvents.

·        VOC compliant < 100 grams / liter, meets AQMD Rule 1113 for concrete sealer coatings.

 Meets ASTM Test on Coat Film Performance Characteristics

·        ASTM D0968 Abrasion Resistance (Method A)

·        ASTM D2369 Wt. Total Solids (28-30%)

·        ASTM D0714 Blistering Test (100% Passed)

·        ASTM D2243 Freeze Thaw Resistance (Passed)

·        ASTM D2794 Impact Res. (60 lbs/in² - Passed)

·        ASTM C-309 Liq. Membrane Forming (T1-Passed)

·        ASTM C-1315 Special Prop for Curing (T1-Passed)

·        ASTM D-1309 Test for Settling (Passed)

·        ASTM D3363 Pencil Hardness Test (2H)

·        ASTM D1630 Dry Time

·        5-10 minutes – tack free

·        1 – 2 hrs – dry hard - 16-24 hrs – dry through