A vapor coating retarder that can be applied on new precast concrete. An excellent choice for in ground vaults. The product is a mixture of emulsified acrylic (min. 50% post-consumer) and bituminous polymers of low VOC designed for above and below grade coating applications on concrete, stucco, masonry type substrates, modified bitumen, and rigid polyurethane foam ply, and rigid PVC materials. This modified acrylic and bituminous coating also provides excellent adhesion on incidental applications on metal and wood substrates.
CM Dampprofing Coating is a high solids system and provides a seamless durable coating, superior adhesion and flexibility to a variety of substrates, contains fungicide and mildewcide protection, UV protection, and heat reflective properties saving cooling costs, and provides water resistance and vapor permeability. The CM Dampprofing Coating comes in standard gray color and may also be custom color matched.
PRODUCT APPLICATION:
The product can be applied either by brush, roller or spray. For spray applications, the product can be both applied either by spray atomization or airless techniques. Please follow the spray equipment manufacturer recommendations for spray applications and optimize when the desired coating is achieved. For airless or air assisted sprayers we suggest to use 0.027 or 0.031 size tip and always maintain a uniform coating application.
LEED POINTS CREDIT
MR Credit 4.1: Recycled Content: 10%, (post-consumer + 1/2 pre-consumer) - 1 Point
MR Credit 4.2: Recycled Content: 20%, (post-consumer + 1/2 pre-consumer) - 1 Point in addition to MR Credit 4.1
Use materials with recycled content such that the sum of post-consumer recycled content plus one-half of the
pre-consumer content constitutes at least 10% (based on cost) of the total value of the materials in the project.
MR Credit 5.1: Regional Materials: 10% Extracted, Processed & Manufactured Regionally – 1 Point
MR Credit 5.2: Regional Materials: 20% Extracted, Processed & Manufactured Regionally - 1 Point in addition to MR Credit 5.1
Use building materials or products that have been extracted, harvested or recovered, as well as manufactured,
within 500 miles of the project site for a minimum of 10% (based on cost) of the total materials)
EQ Credit 4.2: Low-Emitting Materials: Paints & Coatings - 1 Point
Do not exceed the VOC content limits established in South Coast Air Quality Management District (SCAQMD) Rule 1113, Architectural Coatings, rules in effect on January 1, 2004.
No comments:
Post a Comment