CM 7007 Dampproof and Waterproof Coating is a vapor coating retarder that can be applied on new precast concrete. The product is a mixture of emulsified acrylic (min. 50% post-consumer) and bituminous polymers of low VOC designed for above and below grade coating applications on concrete, stucco, masonry type substrates, modified bitumen, and rigid polyurethane foam ply, and rigid PVC materials. This modified acrylic and bituminous coating also provides excellent adhesion on incidental applications on metal and wood substrates. This product is breathable for concrete.
CM 7007 Dampproof and Waterproofing Coating is a high solids system and provides a seamless durable coating, superior adhesion and flexibility to a variety of substrates, contains fungicide and mildewcide protection, UV protection, and heat reflective properties saving cooling costs, and provides water resistance and vapor permeability. It comes in a standard gray color and can be color matched to any darker colors.
Meets Federal and State VOC limit requirements for volatile organic components (VOC).
Complies with South Coast Air Quality Management District (SCAQMD) VOC limit.
Hardness (ASTM C-836) Shore Type 00 Durometer 81
Hydrostatic Resistance (ASTM D-751) Method A, Procedure 1 36 psi (max head resisted)
Water Vapor Transmission (ASTM E-96) Procedure B, water method 1 coat: 7.8 grain/ hr-ft2
LEED POINTS CREDIT
MR Credit 4.1: Recycled Content: 10%, (post-consumer + 1/2 pre-consumer) - 1 Point
MR Credit 4.2: Recycled Content: 20%, (post-consumer + 1/2 pre-consumer) - 1 Point in addition to MR Credit 4.1
Use materials with recycled content such that the sum of post-consumer recycled content plus one-half of the
pre-consumer content constitutes at least 10% (based on cost) of the total value of the materials in the project.
MR Credit 5.1: Regional Materials: 10% Extracted, Processed & Manufactured Regionally – 1 Point
MR Credit 5.2: Regional Materials: 20% Extracted, Processed & Manufactured Regionally - 1 Point in addition to MR Credit 5.1
Use building materials or products that have been extracted, harvested or recovered, as well as manufactured,
within 500 miles of the project site for a minimum of 10% (based on cost) of the total materials
No comments:
Post a Comment